Figure 7-26 Arithmetic Function Block Diagram
7.13.1 Block Errors
Table 7-32 lists the conditions reported in the BLOCK_ERR parameter.
Table 7-32 BLOCK_ERR Parameters
Condition Number Condition Name and Description
0 Other: The output has a quality of uncertain.
1 Block Configuration Error: Select type is not configured
2 Link Configuration Error
3 Simulate Active
4 Local Override
5 Device Fault State Set
6 Device Needs Maintenance Soon
7 Input Failure/Process Variable has Bad Status: One of the inputs is Bad or not connected.
8 Output Failure
9 Memory Failure
10 Lost Static Data
11 Lost NV Data
12 Readback Check Failed
13 Device Needs Maintenance Now
14 Power Up: The device was just powered-up.
15 Out of Service: The actual mode is out of service.
To Next Page
Loading...
