Need help?Do you have a question about the Eminent EM8610 and is the answer not in the manual?
Lists all components included in the alarm system starter kit.
Identifies controls, indicators, and buttons on the front of the main unit.
Describes components and features on the back of the control panel.
Explains the various input/output connection terminals on the rear.
Guidelines for selecting and preparing a SIM card for the GSM module.
Instructions for downloading and installing the Eminent e-Alarm mobile application.
Guidance on planning the optimal placement for alarm system sensors.
How to configure sensors into different operational groups using jumper settings.
Details about sensors that are pre-paired with the alarm system.
Steps for physically installing the control panel on a wall or table.
How to arm the alarm system with all sensors active.
Instructions for partially arming the system for in-home security.
Method for disarming the alarm system using the control panel keypad.
Procedure to disarm the system using an RFID tag.
How to record and listen to personal voice messages on the system.
Details on using RFID tags for disarming and receiving notifications.
How to use the speed dial feature to call pre-set numbers.
Instructions for making direct calls using the alarm system's dialer.
Information on how the system can control an electronic door lock.
How to change the system's display language via SMS or APP.
Guide to controlling and configuring the system using SMS commands.
How to disarm the alarm system by sending a specific SMS command.
How to arm the alarm system by sending a specific SMS command.
Procedure to partially arm the system in home mode using SMS.
How to use the two-way audio communication feature via SMS.
How to remotely record a voice message for the alarm system.
Steps to create and set up a new account in the mobile application.
Instructions for removing an account from the mobile application.
Overview of functions available for controlling the alarm system through the app.
How to configure alarm system settings using the mobile application.
How to retrieve current system configuration settings via SMS.
Steps to set up phone numbers that will be called during an alarm.
How to set up phone numbers that will receive SMS alerts during an alarm.
Explains the order and timing of SMS and phone call notifications during an alarm.
Setting a phone number to receive alerts when an RFID tag is used.
How to assign a phone number for the speed dial function.
Customizing names for individual sensors or zones via SMS.
How the system alerts about low battery levels in sensors.
Alerts received when a sensor is tampered with or sabotaged.
How to assign or modify names for RFID tags.
Setting entry and exit delay times for alarm system zones.
How to adjust the volume and duration of the alarm siren.
Procedure for changing the default disarm password of the alarm system.
Configuring specific entry delay times for individual sensor zones.
How to remove all paired wireless sensors from the system using SMS.
Procedure to remove all registered RFID tags from the system.
How to delete all paired remote controls from the system.
Resetting the alarm system to its original factory settings.
Method to arm/disarm the system by calling the alarm number.
Instructions for adding wireless sensors and RFID tags.
Steps for registering an optional wireless siren accessory.
Identifies the buttons and features on the remote control.
How to arm the alarm system using the remote control.
How to disarm the alarm system using the remote control.
Using the remote to activate the in-home security mode.
How to arm or disarm the system silently using the remote.
How to activate the panic alarm function using the SOS button.
Steps to pair an additional remote control with the system.
Guide on how to replace the battery in the remote control.
Identifies the external components and indicators of the motion detector.
Details internal parts like infrared sensors, anti-sabotage button, and LED settings.
Covers rear view, test mode, activation, pairing, and installation tips.
How to test the motion detector's functionality after installation.
Identifies the external components of the window/door sensor.
Explains internal parts, anti-sabotage button, and jumper settings for group configuration.
Recommendations for optimal placement and installation of window/door sensors.
Steps to pair a window/door sensor with the alarm system.
Technical details of the main alarm system unit.
Technical details for the motion detector accessory.
Technical details for the window/door contact sensor.
General| Dimensions (WxDxH) | 188 x 26 x 132 mm |
|---|---|
| Product color | Black, White |
| Operating frequency | 433 MHz |
| Built-in siren | Yes |
| Operating temperature (T-T) | -10 - 55 °C |
| Power requirements | AC 110 – 240V / 50-60Hz |
Weight and Dimensions| Weight | 265 g |
|---|
To Next Page
