3.3 Plan for sensor placement
Before starting to install the alarm system it is important to make a plan. Determine the
locations you want to secure and what type of sensor is needed. Also you need to
determine what group type or configuration the sensor needs to be installed in. Every
type of sensor needs to be placed in a group; Home-group, normal group, single
group or 24-hours group.
Illustration below is an example of a plan that determines what sensor should be
placed for the preferred security.
A. Alarm system
B. Remote control
C. Siren
1. Front door : Window/door contact
2. Living room : Motion detector PIR
3. Window - Living room : Window/door contact
4. Window - Living room : Window/door contact
5. Door-terrace : Window/door contact
6. Window – Bedroom : window/door contact
7. Bedroom : Motion detector PIR
8. Kitchen : Gas detector
To Next Page
Loading...
