9.2 Inside the window/door sensor
9.2.1 Anti sabotage button
If the sensor is opened this switch will detect it and trigger the alarm.
9.2.2 Group settings (jumpers)
Every sensor can be configured to be added to a single group by setting the jumper
settings; home-group, normal group, single group or 24-hours group.
Bellow you will see an overview of the meaning and how to configure the jumper
settings for that type of zone.
Remark : Determine before pairing with the alarm system in which group the sensor
will be operational. Once the sensor is successfully paired with the system. The group
cannot be changed after pairing!
Remark: If the group of a sensor needs to be changed All sensors need to be paired
with the alarm system once more. It is not possible to remove one single sensor from
a group ! (See chapter “Delete all wireless sensors by text message”)
To Next Page
Loading...
