EMS DOLORCLAST User Manual

25
ČEŠTINA HRVATSKI ΕΛΛΗΝΙΚΑ ENGLISH
6.3.2. Burst Mode 2
Burst mode 2 makes it possible to manually switch
between a set frequency and a frequency of 25Hz.
Figure 51
1. Press the Burst button twice to activate Burst mode 2.
The LED signies that the mode is enabled.
bar
Hz
Impulses
1.5
25
1000
SMART PROTOCOL
bar
Hz
Impulses
1.5
25
1000
SMART PROTOCOL
Figure 52
2. To activate Burst mode 2 while delivering the treatment,
press and hold the trigger for more than one second.
Burst mode will remain active as long as you keep
holding the trigger.
3. To deactivate Burst mode 2 and return to the set
frequency, release the trigger.
You can reactivate Burst mode 2 as long as there
are impulses remaining in the treatment.
00_FB-656_10_rev_A_IFU_Dolorclast RSW.indb 2500_FB-656_10_rev_A_IFU_Dolorclast RSW.indb 25 25/03/2021 17:0725/03/2021 17:07

EMS DOLORCLAST Specifications

General

Brand	EMS
Model	DOLORCLAST
Category	Medical Equipment
Language	English