Endress+Hauser Cerabar M - Page 10

Identification Cerabar M, Deltabar M, Deltapilot M
10 Endress+Hauser
Stainless steel housing, hygienic
A0030021
Fig. 3: Nameplate for Cerabar M and Deltapilot M
1 Device name
2 Order code (for re-orders)
3 Serial number (for identification)
4 Extended order code (complete)
5 Nominal measuring range
6 MWP (maximum working pressure)
7Length data
8 Electronic version (output signal)
9 Supply voltage
10 Min./max. span
11 Wetted materials
12 Approval-specific information
13 ID number of notified body with regard to ATEX (optional)
14 ID number of notified body with regard to Pressure Equipment Directive (optional)
15 Approvals
16 Software version
17 Device version
18 Degree of protection
Devices with certificates are fitted with an additional plate.
A0030024
Fig. 4: Additional nameplate for devices with certificates
1 Approval-specific information
3.2.2 Identifying the sensor type
In the case of gauge pressure sensors, the "Pos. zero adjust" parameter appears in the
operating menu ("Setup" -> "Pos. zero adjust").
In the case of absolute pressure sensors, the "Calib. offset" parameter appears in the
operating menu ("Setup" -> "Calib. offset").
002757-A
p
Order code:
Ext. order code:
Ser. no.:
MWP
D-79689 Maulburg
Made in Germany,
ex works FW
U=
Dev.Rev.:
L=
Span
Mat.:
002758-C
1
2
3
4
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
12
002759-B
1
1