Endress+Hauser Cerabar M - Page 122

Commissioning with an operating menu (onsite display/FieldCare) Cerabar M, Deltabar M, Deltapilot M
122 Endress+Hauser
Position
adjustment


Simulation value
Pressure

Corrected Press.
Damping
Pressure af. damp
Electr. Delta P
Measuring pressure
P
Pressure Level
PV PV = Primary Value

Analog Input Block
Deltabar M
Transducer Block Sensor
Sensor pressure
Sensor trim

Position
adjustment


Simulation value
Pressure

Corrected Press.
Damping
Pressure af. damp

Measuring pressure
P
Pressure Level Flow

PV (PV = Primary Value)

Analog Input Block
Sensor pressure (109)
Display
Displays the measured pressure before the sensor trim and position adjustment.
Corrected press. (172)
Display
Displays the measured pressure after sensor trim and position adjustment.
Pressure af. damp (111)
Display
Displays the measured pressure after sensor trim, position adjustment and
damping.
Parameter name Description