Endress+Hauser Deltabar FMD72 - FMD71 Process Connections, Flush-Mounted Process Isolating Diaphragm

Deltabar FMD71, FMD72
Endress+Hauser 43
FMD71 process connections,
flush-mounted process
isolating diaphragm
ASME flanges, connection dimensions as per ASME B 16.5, raised face RF
D
k
b
2.44
0.08
g
2
g
1.024
A0026337
Engineering unit in
Flange
1)
Boltholes Weight Option
2)
NPS (nominal diameter of
pipe)
Class Material D Thickness Raised face Number g
2
Hole circle
b g k
in lb./sq.in in in in in in kg (lbs)
1 150 AISI 316/316L
3)
4.25 1.18 2 4 0.62 3.12 0.9 (1.98) ACJ
1 300 AISI 316/316L
3)
4.88 1.18 2 4 0.75 3.5 1.4 (3.09) ANJ
1 ½ 150 AISI 316/316L
3)
5 0.69 2.88 4 0.62 3.88 2.1 (4.63) AEJ (CRN)
1 ½ 300 AISI 316/316L
3)
6.12 0.81 2.88 4 0.88 4.5 2.6 (5.73) AQJ (CRN)
2 150 AISI 316/316L
3)
6 0.75 3.62 4 0.75 4.75 3.0 (6.62) AFJ (CRN)
2 150 ECTFE
4)
6 0.75 3.62 4 0.75 4.75 2.4 (5.29) AFN
2 150 PVDF 6 0.75 3.62 4 0.75 4.75 0.5 (1.10) AFF
2 300 AISI 316/316L
3)
6.5 0.88 3.62 8 0.75 5 3.2 (7.06) ARJ (CRN)
3 150 AISI 316/316L
3)
7.5 0.94 5 4 0.75 6 5.7 (12.57) AGJ (CRN)
3 150 ECTFE
4)
7.5 0.94 5 4 0.75 6 4.9 (10.80) AGN
3 150 PVDF 7.5 0.94 5 4 0.75 6 0.9 (1.98) AGF
3 300 AISI 316/316L
3)
8.25 1.12 5 8 0.88 6.62 6.8 (14.99) ASJ (CRN)
4 150 AISI 316/316L
3)
9 0.94 6.19 8 0.75 7.5 7.8 (17.2) AHJ (CRN)
4 150 ECTFE
4)
9 0.94 6.19 8 0.75 7.5 7.1 (15.66) AHN
4 300 AISI 316/316L
3)
10 1.25 6.19 8 0.88 7.88 11.6 (25.58) ATJ (CRN)
1) AISI 316L
2) Product Configurator order code for "Process connection"
3) Combination of AISI 316 for required pressure resistance and AISI 316L for required chemical resistance (dual rated)
4) ECTFE coating on AISI 316/316L. When using in hazardous areas: avoid electrostatic charge on the plastic surfaces.