Endress+Hauser Deltabar FMD72 - Materials Not in Contact with Process

Deltabar FMD71, FMD72
56 Endress+Hauser
Materials not in contact with
process
T14 transmitter housing
14
5
3
3
15
6
8
13
9
10
11
12
4
1
7
2
2
A0016496
Item number Component part Material
1 T14 housing, RAL 5012 (blue) Die-cast aluminum with protective powder-coating on
polyester base
T14 housing Precision cast AISI 316L (1.4435)
2 Cover, RAL 7035 (gray) • Die-cast aluminum with protective powder-coating on
polyester base
• Coating on thread: Heat-curing lubricant varnish
Cover • Precision cast AISI 316L (1.4435)
• Coating on thread: Heat-curing lubricant varnish
3 Cover seal EPDM
4 Nameplates AISI 304 (1.4404)
5 Pressure compensation filter, O-ring VMQ or EPDM
6 Pressure compensation filter AISI 316L (1.4404) and PBT-FR
7 External operation (keys and key
cover), RAL 7035 (gray)
Polycarbonate PC-FR, screw A4
8 Cable entry Polyamide (PA)
Seal Silicone (VMQ)
9 Blind plug PBT-GF30 FR, for dust ignition-proof: AISI 316L
(1.4435)
Seal Silicone (VMQ)
10 Sight glass Mineral glass
(polycarbonate on request)
Sight glass seal Silicone (VMQ)
11 Screw A4
12 Sealing ring EPDM
Snap ring PA66-GF25
13 Round strand rope for nameplates AISI 304 (1.4301) / AISI 316 (1.4401)
14 External ground terminal AISI 304 (1.4301)
15 Cover clamp Clamp AISI 316L (1.4435), screw A4