Endress+Hauser Deltabar PMD75B User Manual

Deltabar PMD75B PROFINET with Ethernet-APL Diagnostics and troubleshooting
Endress+Hauser 65
Symbol Meaning
Out of specification
Device is being operated outside its technical specification limits (e.g. outside the process
temperature range)
Maintenance required
Maintenance is required
The measured value remains valid
The status signals are categorized in accordance with VDI/VDE 2650 and NAMUR
Recommendation NE 107.
Diagnostic information
Devices without a display: The fault can be identified using the diagnostic information. The
short text helps you by providing information about the fault. In addition, the
corresponding symbol for the diagnostic behavior is displayed in front of the diagnostic
information on the local display.
Devices with a display:
Diagnostic information
Diagnostic code
Diagnostic
behavior
Status signal
Diagnostic
number
Short text
↓ ↓ ↓
Example
A0013962 A0013958
842 Process limit
NAMUR
NE 107
3-digit number
11.4.2 Calling up remedial measures
Remedial measures are provided for each diagnostic event to ensure that problems can be
rectified quickly. These measures are displayed in red along with the diagnostic event and
the related diagnostic information.
11.5 Diagnostic list

Endress+Hauser Deltabar PMD75B Specifications

General

Brand	Endress+Hauser
Model	Deltabar PMD75B
Category	Measuring Instruments
Language	English