Deltabar S
34 Endress+Hauser
Current Mode
7)
052 HART Data Signaling
8)
or
Enabled
9)
Signaling
)
or
Enabled
)
Bus Address 345 0 0
After locking: Config. Recorder 352 Transmitter data
1) After performing the reset with the reset code "7864"
2) Within sensor range
3) According to ordering specifications
4) Depending on the "Press. Sens. Hilim (485)" parameter
5) Alarm setting from firmware version ≥ 02.30.zz
6) Setting influences SFF
7) Only from firmware version ≥ 02.20
8) Onsite display and FieldCare
9) HART handheld terminal
Parameter name Display ID Group Factory
setting
1)
Permitted
settings
Specified value Read-out
actual
value
Checked
Company: Date: Signature:
To Next Page
Loading...
