Endress+Hauser Profi Bus Levelflex M FMP40 - Page 38

Levelflex M FMP40
38 Endress+Hauser
Installation with remote electronics
• Wall and pipe bracket is contained in the scope of delivery and already mounted.
• When installing, follow the instructions, → ä 22.
• Mount housing on a wall or pipe (vertically or horizontally) as shown in the diagram.
L00-FMP4xxxx-17-00-00-en-015
Note!
The protective hose cannot be disassembled at these points (1).
The ambient temperature for the connecting pipe (2) between the probe and the electronics must not be greater
than 105 °C. The version with remote electronics consists of the probe, a connecting cable and the housing.
If they are ordered as a complete unit they are assembled when delivered.
150
ENDRESS+HAUSER
Levelflex M
65 78
ø129
85
150
ENDRESS+HAUSER
Levelflex M
65 78
ø129
85
52
52
150
max. 80
min. 30
96
94
94
88
88
123
2765
80
260
75
≥
ø76
1
1
4xø8,5
1
1
2
pipe
wall
Note min.
bend radius!
ø21.3