Levelflex M FMP40
68 Endress+Hauser
Mounting-kit isolated
Mounting-kit Order-No.
For 4mm rope probe 52014249
L00-FMP4xxxx-17-00-00-en-036
For 6mm rope probe 52014250
If a rope probe has to be fixed and a secure grounded
mounting is not possible, we recommend using the insulating
sleeve made of PEEK GF-30 with accompanying DIN 580
eye-bolt made of stainless steel.
Max. process temp. 150 °C.
Due to the risk of electrostatic charge, the insulating sleeve is
not suitable for use in hazardous areas. In these cases the
fixing must be reliably grounded (→ ä 26).
To Next Page
Loading...
