Levelflex M FMP40
Endress+Hauser 63
Remote display FHX40
L00-FMxxxxxx-00-00-06-xx-000
1 Micropilot M, Levelflex M, Prosonic M A Wall mounting (without mounting bracket)
2 Separate housing FHX40 (IP65) B Pipe mounting (mounting bracket and plate supplied
3 Cabel optionally, see product structure)
4 Pipe
Note!
For the device families Micropilot FMR2xx, Levelflex FMP4x and Prosonic FMU4x, the remote display FHX40
must be only used for the HART communication version.
Ordering information:
For connection of the remote display FHX40 use the cable which fits the communication version of the
respective instrument.
010 Approval
A Non-hazardous area
2 ATEX II 2G Ex ia IIC T6
3 ATEX II 2D Ex ia IIIC T80°C
G IECEx zone1 Ex ia IIC T6/T5
S FM IS Cl.I Div.1 Gr.A-D, zone 0
U CSA IS Cl.I Div.1 Gr.A-D, zone 0
N CSA General Purpose
K TIIS Ex ia IIC T6
C NEPSI Ex ia IIC T6/T5
Y Special version, TSP-no. to be spec.
020 Cable
1 20m/65ft; for HART
5 20 m/65 ft (> PROFIBUS PA / FOUNDATION Fieldbus)
9 Special version, TSP-no. to be spec.
030 Additional option
A Basic version
B Mounting bracket, pipe 1"/ 2"
Y Special version, TSP-no. to be spec.
995 Marking
1 Messstelle (TAG), see additional spec.
FHX40 - Complete product designation