Levelflex M FMP40
Endress+Hauser 53
Remote operation The Levelflex M can be remotely operated via HART, PROFIBUS PA and FOUNDATION Fieldbus. Onsite
adjustments are also possible.
Operation with FieldCare
FieldCare is an Endress+Hauser Plant Asset Management Tool based on FDT technology. You can use Field-
Care to configure all your Endress+Hauser devices, as well as devices from other manufacturers that support
the FDT standard. Hardware and software requirements you can find on the internet:
www.endress.com → select your country → search: FieldCare → FieldCare → Technical Data.
FieldCare supports the following functions:
• Online configuration of transmitters
• Signal analysis via envelope curve
• Tank linearization
• Loading and saving of device data (upload/download)
• Documentation of the measuring point
Connection options:
• HART via Commubox FXA195 and the USB port of a computer
• PROFIBUS PA via segment coupler and PROFIBUS interface card
• Commubox FXA291 with ToF Adapter FXA291 via service interface
Menu-guided commissioning
L00-FMP4xxxx-20-00-00-en-001
To Next Page
Loading...
