Endress+Hauser Profi Bus Levelflex M FMP40 - Process Connection; Seal; Probe

Levelflex M FMP40
Endress+Hauser 49
Alloy variant
L00-FMP40xxx-16-00-00-en-003
DIN/EN flanges
Endress+Hauser supplies DIN/EN flanges made of stainless steel according to AISI 316L (DIN/EN material
number 1.4404 or 1.4435). With regard to their temperature stability properties, the materials 1.4404 and
1.4435 are grouped under 13E0 in EN 1092-1 Tab. 18. The chemical composition of the two materials can be
identical.
Process connection See "Ordering information", → ä 58.
Seal See "Ordering information", → ä 58.
Probe See "Ordering information", → ä 58.
Pos. Part Material
1 Adapter 2.4602
2 Insulation sleeve TFM1600
3 Rod probe 2.4602
4 Flange 316L (1.4404 / 1.4435)
5 Flange plating 2.4602
6
Coax probe 2.4602
Spacer PFA
Rod probe
Coax probe
Threadedconnection
G1½ (1½BSP)
or 1½NPT
Flange DN40 to 200
or equivalent
3
6
3
1
4
2
1
2
3
5
3