Endress+Hauser Profi Bus Levelflex M FMP40 - Page 59

Levelflex M FMP40
Endress+Hauser 59
Product structure Levelflex M FMP40
10 Approval:
A Non-hazardous area
F Non-hazardous area, WHG
1 ATEX II 1/2G Ex ia IIC T6/IECEx Zone 0/1
2 ATEX II 1/2D/IEC Ex td A20/21, Alu blind cover
3 ATEX II 2G Ex emb (ia) IIC T6/IECEx Zone1
4 ATEX II 1/3D/IEC Ex td A20/22
5 ATEX II 1/2G Ex ia IIC T6, ATEX II 1/3D
6 ATEX II 1/2G Ex ia IIC T6, WHG
7 ATEX II 1/2G Ex d (ia) IIC T6/ IEC Ex d(ia) IIC T6
8 ATEX II 1/2G Ex ia IIC T6, ATEX II 1/3D, WHG
G ATEX II 3G Ex nA II T6
C NEPSI Ex emb (ia) IIC T6
I NEPSI Ex ia IIC T6
J NEPSI Ex d (ia) IIC T6
QNEPSI DIP
R NEPSI Ex nA II T6
M FM DIP Cl.II Div.1 Gr. E-G N.I.
S FM IS Cl.I,II,III Div.1 Gr. A-G N.I., zone 0, 1, 2
T FM XP Cl.I,II,III Div.1 Gr. A-G, zone 1, 2
N CSA General Purpose
P CSA DIP Cl.II Div.1 Gr. G + coal dust, N.I.
U CSA IS Cl.I,II,III Div.1 Gr. A-D, G + coal dust, N.I., zone 0, 1, 2
V CSA XP Cl.I,II,III Div.1 Gr. A-D, G + coal dust, N.I., zone 1, 2
W IEC Ex td A20/21, Alu blind cover
X IEC Ex td A20/22
K TIIS Ex ia IIC T4 (in preparation)
L TIIS Ex d (ia) IIC T4
Y Special version, TSP-No. to be spec.
20 Probe:
A Rope 4mm / 1/6", mainly liquid
B Rope 6mm / 1/4", solid
H Rope 6mm / 1/4", PA > steel, solid, T
max
= 100°C / 212°F
P Rod 6mm, liquid
1 Rod 12mm, liquid
K Rod 16mm, mainly liquid
L Coax, liquid
Y Special version, TSP-No. to be spec.
30 Probe length:
A ..... mm, rope 4mm, 316
B ..... mm, rope 6mm, 316
C ..... inch rope 1/6", 316
D ..... inch, rope 1/4", 316
E ..... mm, rope 6mm, PA > steel
F ..... inch, rope 1/4", PA > steel
K ..... mm, rod 16mm, 316L
L ..... mm, coax, 316L
M ..... inch, rod 16mm, 316L
N ..... inch, coax, 316L
P ..... mm, rod 6mm, 316L
R ..... inch, rod 6mm, 316L
S ..... mm, rod 16mm, 316L, 500mm divisible
T ..... mm, rod 16mm, 316L, 1000mm divisible
U ..... inch, rod 16mm, 316L, 20in divisible
V ..... inch, rod 16mm, 316L, 40in divisible
1 ..... mm rod 12mm, AlloyC22
2 ..... mm coax, AlloyC22
3 ..... inch, rod 12mm, AlloyC22
4 ..... inch, coax, AlloyC22
Y Special version, TSP-No. to be spec.
40 O-ring Material; Temperature:
2 Viton; -30...150°C/-22...302°F
3 EPDM; -40...120°C/-40...248°F
4 Kalrez; -5...150°C/23...302°F
9 Special version, TSP-No. to be spec.