Levelflex M FMP40
Endress+Hauser 61
1)
OVP = overvoltage protection
80 Type of Probe:
B Compact, centering disk d=45mm, 316L, pipe diameter DN50/2"
C Compact, centering disk d=75mm, 316L, pipe diameter DN80/3" + DN100/4"
D Spacer, center rod d=45mm, 316L, pipe diameter DN50/2", spacer, 400mm
E Spacer, center rod d=75mm, 316L,pipe diameter DN80/3" + DN100/4",
spacer,400mm
F Remote, cable 3m, top, center d=45mm, centering disk d=45mm, 316L
pipe diameter DN50/2", 316L
G Remote, cable 3m, top, center d=75mm, centering disk d=75mm, 316L,
pipe diameter DN80/3" + DN100/4", 316L
H Remote, cable 3m, side, center d=45mm, centering disk d=45mm, 316L,
pipe diameter DN50/2"
I Remote, cable 3m, side, center d=75mm, centering disk d=75mm, 316L,
pipe diameter DN80/3" + DN100/4"
1 Compact, basic version
2 Spacer, 400mm
3 Remote, cable 3m, top entry
4 Remote, cable 3m, side entry
9 Special version, TSP-No. to be spec.
90 Housing; Cable Entry:
A F12 Alu, coated IP68; gland M20
B F12 Alu, coated IP68; thread G1/2
C F12 Alu, coated IP68; thread NPT1/2
D F12 Alu, coated IP68; plug M12
E F12 Alu, coated IP68; plug 7/8"
G T12 Alu, coated IP68; gland M20 (Ex d > thread M20)
H T12 Alu, coated IP68; thread G1/2
J T12 Alu, coated IP68; thread NPT1/2
K T12 Alu, coated IP68; plug M12
L T12 Alu, coated IP68; plug 7/8"
M T12 Alu, coated IP68; gland M20 + OVP
1)
N T12 Alu, coated IP68; thread G1/2 + OVP
1)
P T12 Alu, coated IP68; thread NPT1/2+OVP
1)
Q T12 Alu, coated IP68; plug M12 + OVP
1)
R T12 Alu, coated IP68; plug 7/8" + OVP
1)
1 F23 316L IP68; gland M20
2 F23 316L IP68; thread G1/2
3 F23 316L IP68; thread NPT1/2
4 F23 316L IP68; plug M12
5 F23 316L IP68; plug 7/8"
Y Special version, TSP-No. to be spec.
100 Additional Option:
A Basic version
B EN10204-3.1 material, wetted parts, (316L wetted parts for rod/coax)
inspection certificate
C EN10204-3.1 material, pressurized, (316L pressurized for rope version)
inspection certificate
H 5-point lienearity protocol, see additional spec.
J 5-point, 3.1, NACE, 5-point linearity protocol, see additional spec.
EN102043.1 material, NACE MR0175 (316L wetted parts),
inspection certificate
N EN10204-3.1 material, NACE MR0175 (316L wetted parts)
inspection certificate
S GL/ABS marine certificate
Y Special version, TSP-No. to be spec.
995 Marking:
1 Tagging (TAG), see additional spec.
2 Bus adress, see additional spec.
FMP40- Complete product designation
To Next Page
Loading...
