Endress+Hauser Proline Promag H 300 - Page 56

Proline Promag H 300
56 Endress+Hauser
Welding nipple according to EN 10357 (DIN 11850)
1.4404 (316L)
Order code for "Process connection", option DAS
DN
[mm]
Suitable for pipe EN 10357 (DIN 11850)
[mm]
A
[mm]
B
[mm]
L
[mm]
2 to 8 13 × 1.5 13 10 132.6
15 19 × 1.5 19 16 132.6
25 29 × 1.5 29 26 132.6
40 41 × 1.5 41 38 220
50 53 × 1.5 53 50 220
65 70 × 2 70 66 220
80 85 × 2 85 81 280
100 104 × 2 104 100 280
125 129 × 2 129 125 300
150 154 × 2 154 150 300
Surface roughness: R
a
≤ 0.8 µm, optional ≤ 0.38 µm
Please note the internal diameters of the measuring tube and process connection (B) when cleaning with pigs.
Welding nipple according to ISO 2037
1.4404 (316L)
Order code for "Process connection", option IAS
DN
[mm]
Suitable for pipe ISO 2037
[mm]
A
[mm]
B
[mm]
L
[mm]
2 to 8 12.7 × 1.65 12.7 9 118.2
15 19.1 × 1.65 19.1 16 118.2
25 25.4 × 1.65 25.4 22.6 118.2
40 38 × 1.2 38 35.6 220
50 51 × 1.2 51 48.6 220
65 63.5 × 1.6 63.5 60.3 220
80 76.1 × 1.6 76.1 72.9 220
100 101.6 × 2 101.6 97.6 220
125 139.7 × 2 139.7 135.7 380
150 168.3 × 2.6 168.3 163.1 380
Surface roughness: R
a
≤ 0.8 µm, optional ≤ 0.38 µm
Please note the internal diameters of the measuring tube and process connection (B) when cleaning with pigs.
Welding nipple according to ASME BPE
1.4404 (316L)
Order code for "Process connection", option AAS
DN
[mm]
Suitable for pipe ASME BPE
[mm]
A
[mm]
B
[mm]
L
[mm]
2 to 8 12.7 × 1.65 12.7 9 118.2
15 19.1 × 1.65 19.1 16 118.2
25 25.4 × 1.65 25.4 22.6 118.2
40 38.1 × 1.65 38.1 34.8 220
50 50.8 × 1.65 50.8 47.5 220
65 63.5 × 1.65 63.5 60.2 220