Endress+Hauser Proline Promag H 300 - Power consumption; Current consumption; Power supply failure; Electrical connection

Proline Promag H 300
26 Endress+Hauser
Power consumption Transmitter
Max. 10 W (active power)
Current consumption Transmitter
• Max. 400 mA (24 V)
• Max. 200 mA (110 V, 50/60 Hz; 230 V, 50/60 Hz)
Power supply failure
• Totalizers stop at the last value measured.
• Configuration is retained in the plug-in memory (HistoROM DAT).
• Error messages (incl. total operated hours) are stored.
Electrical connection Connecting the transmitter
• Terminal assignment→  24
• Device plugs available→  25
1
2
3
A0026781
1 Cable entry for supply voltage
2 Cable entry for input/output signal transmission
3 Cable entry for input/output signal transmission; Optional: connection of external WLAN antenna,
connection of remote display and operating module DKX001 or service plug
Connection of remote display and operating module DKX001
1
2
3
81
Vcc
82
Gnd
83
A
84
B
81
Vcc
82
Gnd
83
A
84
B
A0027518
1 Remote display and operating module DKX001
2 Connecting cable
3 Measuring device
Remote display and operating module DKX001 →  91