Endress+Hauser Proline Promag H 300 - Page 58

Proline Promag H 300
58 Endress+Hauser
Welding nipple according to ISO 2037
1.4404 (316L)
Order code for "Process connection", option I1S
DN
[mm]
Suitable for pipe ISO 2037
[mm]
A
[mm]
B
[mm]
L
[mm]
25 33.7 × 3.25 33.7 27.2 126.6
Surface roughness: R
a
≤ 1.6 µm
Clamp connections
Clamp connections with aseptic molded seal
L
A
B
A0015625
Clamp according to DIN 32676
1.4404 (316L)
Order code for "Process connection", option DBS
DN
[mm]
Suitable for pipe EN 10357 (DIN 11850)
[mm]
A
[mm]
B
[mm]
L
[mm]
2 to 8 14 × 2 (DN 10) 34 10 168
15 20 × 2 (DN 15) 34 16 168
25 30 × 2 (DN 25) 50.5 26 175
40 41 × 1.5 50.5 38 220
50 53 × 1.5 64 50 220
65 70 × 2 91 66 220
80 85 × 2 106 81 220
100 104 × 2 119 100 220
125 129 × 2 155 125 300
150 154 × 2 183 150 300
Surface roughness: R
a
≤ 0.8 µm, optional ≤ 0.38 µm
Please note the internal diameters of the measuring tube and process connection (B) when cleaning with pigs.
Tri-Clamp for L14 AM7
1.4404 (316L)
Order code for "Process connection", option FAS
DN
[mm]
Suitable for pipe as per ASME BPE
[mm]
A
[mm]
B
[mm]
L
[mm]
2 to 8 12.7 × 1.65 25 9.4 143
15 19.1 × 1.65 25 15.8 143
25 25.4 × 1.65 50.4 22.1 143
40 38.1 × 1.65 50.4 34.8 220