Endress+Hauser Proline Promass P 300 - Page 79

Proline Promass P 300
Endress+Hauser 79
Order code for "Housing", option B "Stainless, hygienic"
DN A
1)
B
1)
C D E
2)
F
2)
G H I K L M
[in] [in] [in] [in] [in] [in] [in] [in] [in] [in] [in] [in] [in]
³⁄₈ 7.20 2.87 4.33 4.25 10.47 14.72 8.15 2.56 5.59 0.33
3)
3.62
½ 7.20 2.87 4.33 4.25 10.47 14.72 8.15 2.56 5.59 0.47
3)
3.62
1 7.20 2.87 4.33 4.76 10.47 15.24 8.15 2.56 5.59 0.69
3)
3.62
1½ 7.20 2.87 4.33 6.93 11.69 18.70 8.15 2.56 5.59 1.02
3)
5.59
2 7.20 2.87 4.33 10.24 12.20 22.52 8.15 2.56 5.59 1.49
3)
6.65
1) Depending on the cable gland used: values up to + 1.18 in
2) With order code for "Sensor option", option CG or order code for "Measuring tube material", option TD, TG:
values +2.76 in
3) Depends on the process connection in question
Flange connections
Fixed flange ASME B16.5
C
D
A
B
E
L
A0015621
Length tolerance for dimension L in inch:
+0.06 / –0.08
Flange according to ASME B16.5: Cl 150
1.4404 (316/316L)
Order code for "Process connection", option AAW
DN
[in]
A
[in]
B
[in]
C
[in]
D
[in]
E
[in]
L
[in]
³⁄₈
1)
3.54 2.37 4 × Ø0.62 0.44 0.62 13.23
½ 3.54 2.37 4 × Ø0.62 0.44 0.62 17.32
1 4.33 3.13 4 × Ø0.62 0.56 1.05 22.83
1½ 4.92 3.87 4 × Ø0.62 0.69 1.61 27.83
2 5.91 4.75 4 × Ø0.75 0.75 2.07 32.6
Surface roughness (flange): Ra 3.2 to 6.3 µm
1) DN ³⁄₈" with DN ½" flanges as standard