Endress+Hauser Proline t-mass 65I - Graphical Illustration of the Function Matrix

Installation Proline t-mass 65
6 Endress+Hauser
2.2.2 Pipework requirements
Good engineering practice should be followed at all times.
Further information is provided in ISO Standard 14511.
!
Note!
Measuring errors will result due to a mismatch of the pipes or gaskets.
2.2.3 Orientation
Make sure that the direction arrow on the sensor matches the direction of gas flow through the
pipe.
Avoid
A0007520 A0007521 A0007522
Pipe diameter one is not equal to pipe
diameter two
Incorrectly sized gaskets Incorrectly aligned Flanges and
gaskets
Flanged version
A0007512
A0007514 A0007515
compact remote compact remote compact remote
Ãà m Ãà m Ãà Ãà à o à o
Insertion version
A0007516
A0007517 A0007518
compact remote compact remote compact remote
à m n Ãà m Ãà Ãà à o à o
ÃÃ = Recommended orientation
à = Orientation recommended in certain situations
m…o = See following description