Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Submenu Pump Control N → Storm Function; Submenu Pump Control N → Function Test; Submenu Pump Control N → Flush Control

Operating menu Prosonic S FMU90 PROFIBUS DP
102 Endress+Hauser
Parameter set R1601 "Storm function N"
• Storm function
• Switch-on point
• Switch-off point
• Storm time
14.6.6 Submenu "Pump control N → Function test"
Valid for:
• FMU90-*3**********
• FMU90-*4**********
Navigation to the submenu:
Relay/controls → Pump control N → Function test
Parameter set R1602 "Function test N"
• Function test
• Max. downtime
• Max. test time
• Switch-on point
• Switch-off point
14.6.7 Submenu "Pump control N → Flush control"
Valid for:
• FMU90-*3**********
• FMU90-*4**********
Navigation to the submenu:
Relay/controls → Pump control N → Flush control
Parameter set R1603 "Flush control N"
• Flush control
• Pump cycles
• Flush cycles
• Flush time
• Flush delay
Parameter set R1605 "Relay allocation → Relay M"
• Function
• Invert
14.6.8 Submenu "Pump control N → Tariff control"
Valid for:
• FMU90-*3******B***
• FMU90-*4******B***
Navigation to the submenu:
Relay/controls → Pump control N → Tariff control
Parameter set R1607 "Tariff control N"
• Tariff control
• Tariff input
Parameter set R1608 "Tariff control N"
Pump M
Parameter set R1619 "Tariff ctrl N/pump M"
• Switch-on point
• Switch-on tariff
• Switch-off point
• Switch-off tariff