Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Connecting the Remote Display and Operating Module

Electrical connection Prosonic S FMU90 PROFIBUS DP
42 Endress+Hauser
Connection of the Omnigrad S TR61 temperature sensor in hazardous areas
83
84
FMU90
85
83 84
FMU90
85
A
B
↑↑
RD
↑↑
RD
.
-
.
-
A0033403
 38 Connection of the Omnigrad S TR61 in hazardous areas
A Temperature sensor in hazardous area
B Temperature sensor in hazardous area, with connection at terminal box
RD Wire color = red
Omnigrad S models suitable for connection
Depends on the approval required:
• TR61-E***********
• TR61-H***********
• TR61-M***********
• TR61-N***********
• TR61-R***********
• TR61-S***********
• TR61-2***********
• TR61-3***********
Additional information
• Technical Information TI01029T
• Ex documentation (XA) supplied with the TR61. This is an integral part of the
documentation. The installation specifications, connection data and safety instructions
listed in this supplementary documentation must be observed.
After connecting the sensor
Assign the temperature sensor to an ultrasonic sensor via the operating menu:
Sensor management → Sensor management → US sensor N → Temperature
measurement = External temperature
6.3.11 Connecting the remote display and operating module
Valid for:
Order code 040 (operation)
Option E (illuminated display + keypad, 96x96, panel mounting, IP65 at front)