Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Configuration of the Type of Visualization

Commissioning Prosonic S FMU90 PROFIBUS DP
66 Endress+Hauser
A0036767
 55 "Type" = "alter.3x2 val.". Up to six values can be displayed. These values are spread over three pages with
two values on each. These pages are displayed cyclically.
Press in the main display screen to change to the next value immediately.
Configuration of the type of visualization
1. Navigate to the parameter set Display → Display.
2. Select the type of visualization in the Type parameter (see above).
3. For Type = Value max size or Alter. 5x2 val.:
In the Time parameter, specify the time after which the next screen is displayed.
4. In the Value 1 to Value N parameters, select a measured value to be displayed.
5. In the Customized text 1 to Customized text N parameters, enter a text string to be
displayed with the values.
 The specified text string is displayed if Customized text = Yes (see below).
Configuration of the display format
1. Navigate to the parameter set: Display → Display format.
2. In the Format parameter, select the number format for length data.
3. In the No. of decimals parameter, specify the number of decimal places that are
displayed.
4. In the Sep. character parameter, specify whether a comma or dot is used as the
decimal separator.
5. In the Customized text parameter, specify whether Customized text 1 to
Customized text N (see above) is used and displayed on the screen.
Configuration of back to home time
1. Navigate to Display → Back to home → Back to home
2. Specify the time after which the onsite display returns to home (measured value
display).