Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Configuring the Local Display

Prosonic S FMU90 PROFIBUS DP Commissioning
Endress+Hauser 65
• Error handling
• Actual value: the current flow value is used for counting
• Hold: the counter uses the flow value that was present when the error occurred.
• Stop: the counter is stopped.
• External reset
Only on devices with an external switch input.
Select the external input via which the counter is reset.
• External start
Only on devices with an external switch input.
Select the external input via which the counter is started and stopped.
9.4.4 Configuring the local display
Type of visualization
A0036764
 52 "Type" = "1x value+bargr."
A0036765
 53 "Type" = "2x value+bargr."
A0036766
 54 "Type" = "value max size". The different values are displayed cyclically in maximum size.