Ä Alarm set point infringements:
The displays Limit 1 to Limit 4 display an infringement of a
preset alarm set point.
Å Measured value over-range:
If the measured signal exceeds the scaled measurement range
the over-range display illuminates.
Æ Identification fields:
Additional information can be written into the information fields.
In order to write in these fields follow these simple instructions:
- Degrease and clean the front panel.
- Write on the field using a light and water resistant felt tip pen.
Ç Enter push button:
- Entry into the setting up matrix.
- Selection of a operation function in a function group.
- Saving set up data.
È +/- push buttons:
- Selection of function groups within the menu.
- Setting up parameters and numbers (if the push button is
continuously held down then the number change on this
display increases in speed).
Process display
42
To Next Page
Loading...
