Endress+Hauser ria45 - Unit and Offset Settings

RIA45 Appendix
Endress+Hauser 61
Unit
Navigation

Setup → Analog in 1/Analog in 2 → Unit
Description Unit of the channel
Input Customized text, max. 5 digits
Additional information Only displayed if "Signal type" = "Current" or "Voltage" is set.
Temperature unit
Navigation

Setup → Analog in 1/Analog in 2 → Temperature unit
Description Configures the temperature unit
Options °C
°F
K
Factory settings °C
Additional information Only displayed if "Signal type" = "RTD" or "TC" is set.
Offset
Navigation

Setup → Analog in 1/Analog in 2 → Offset
Description Configures an offset
User entry Numerical value
1)
Factory setting 0
Ref junction
Navigation

Setup → Analog in 1/Analog in 2 → Ref junction
Description Configures the reference temperature
Options intern
fixed
Factory setting intern
Additional information Only displayed if "Signal type" = "TC" is set.
Fixed ref junc
Navigation

Setup → Analog in 1/Analog in 2 → Fixed ref junc
Description Configures the constant reference temperature
User entry Numerical value
1)
Additional information Only visible if "fixed" was selected for the "Ref junction".
Reset min/max
Navigation

Setup → Analog in 1/Analog in 2 → Reset min/max