Commissioning RMS621
32 Endress+Hauser
Alarm response
Fault category Default set-up -
Random
Alarm response when process errors occur. As per the factory
setting, all process errors are signalled by a warning message.
By selecting "Random", additional operating items appear in
the inputs and the application to assign a different fault
category (fault message) to the individual process errors (see
Section 5.3 ’Error message display’).
Text input
Standard
Palm
Selects the way of entering text:
•Standard:
Per parameter item, runs up or down the row of characters
until the desired character appears.
•Palm:
The desired character can be selected from the visual key
field with the cursors.
General info
Unit ID Assigns a device name (max. 12 characters long).
TAG number Assigns a TAG number, as in wiring diagrams for example
(max. 12 characters long).
Prog. name Name which is saved in the PC operating software along with
all the settings.
SW version Software version of your device.
SW option Information as to which extension cards are installed.
CPU No.: The CPU number of the device is used as an identifier. It is
saved with all the parameters.
Series No.: This is the serial number of the device.
Run time
1. Unit
2. LCD
1. Information on how long the device has been in operation
(protected by service code.)
2. Information on the operating time of the device display
(protected by service code.)
Function (menu item) Parameter setting Description
To Next Page
Loading...
