Endress+Hauser RMS621 - Page 45

RMS621 Commissioning
Endress+Hauser 45
!
Note!
In Setup "Display", the display functionality is configured. In "Navigator", then select which
group(s) appear(s) with process values on the display.
If displaying one to three values in a group, all values with
the name of the application and identifier (e.g. heat totalizer)
and the related physical unit are displayed.
As of four values, only the values and the physical unit are
displayed.
Function (menu item) Parameter setting Description
Group 1 to 6
Identifier
A name (max. 12 characters) can be given to the groups for a
better overview.
Display mask 1 value to 8 values
Select
Here, set the number of process values which should be
displayed beside one another in a window (as a group). The
way the value is displayed depends on the number of selected
values. The more values in a group, the smaller the display.
Value type Inputs, process values,
counter, totalizer,
miscellaneous
The display values can be selected from 4 categories (types).
Value 1 to 8 Select Selects which process values should be displayed.
Scrolling display Alternating display of individual groups on the display.
Swit. time 0 to 99
0
Seconds until the next group is displayed.
Group X Yes
No
Select the groups that should be displayed alternately.
The alternating display is activated in the "Navigator" / "
Display" (see 6.3.1).
Display
OIML Yes
No
Selects whether the counter readings should be displayed as
per the OIML standard.
No. of sums Counter mode
Exponential
Sum display
Counter mode: sums are displayed with max. 10 positions up
to overflow.
Exponential: exponential display is used for large values.
Contrast 2 to 63
46
For configuring the display contrast. This setting has an
immediate affect. The contrast value is not saved until the
setup is exited.