SS2100 Analyzer
2–2 4900002253 rev. C 9-30-20
Hazards may vary by stream composition. One or more of the following
conditions may apply.
Equipment labels
Flammable. Gases used in the processing of this analyzer may
be extremely flammable. Any work in a hazardous area must be
carefully controlled to avoid creating any possible ignition sources
(e.g., heat, arcing, sparking, etc.).
Toxins. SpectraSensors analyzers measure a variety of gases,
including high-level H
2
S. Follow all safety protocols governing
toxic gases and potential leaks.
Inhalation. Inhaling toxic gases or fumes may cause physical
damage or death.
Technicians are expected to follow all safety protocols established
by the customer that are necessary for servicing or operating the
analyzer. This may include, but is not limited to, lockout/tag-out
procedures, toxic gas monitoring protocols, PPE requirements,
hot work permits and other precautions that address safety
concerns related to performing service or operation on process
equipment located in hazardous areas.
Warning statement for hazardous voltage. Contact may cause
electric shock or burn. Turn off and lock out system before
servicing.
Failure to follow all directions may result in damage or
malfunction of the analyzer.
Maximum voltage and current specifications for the fuse closest
to label.
PROTECTIVE EARTH GROUND - Symbol indicates the
connection point of the ground wire from the main power source.
To Next Page
Loading...
Need help?
General
