Safety Manual 2–1
2 - GENERAL SAFETY INFORMATION
This chapter reviews the general safety instructions for every SS2100 analyzer.
Intended Equipment Use
The SS2100 analyzer is intended for use as instructed in the documentation
package provided with the equipment. SpectraSensors recommends that the
qualified technician read and reference the documentation when installing,
operating or having direct contact with the SS2100 analyzer. Any use of the
equipment in a manner not specified by SpectraSensors could impair the
protection provided by the equipment.
Warning Labels
Equipment labels are adhered to the SS2100 analyzer to alert the user of
potential hazards. Instructional symbols are also used in the equipment
manuals to indicate potential hazards, important information and valuable tips,
and may not labeled on the analyzer. Following are the equipment labels and
instructional symbols with associated warning and caution types to observe
when operating the analyzer.
Safety warning label
The warning label shown below will be affixed to the front side of all analyzer
enclosures that contain sample gas.
The safety of the analyzer is the responsibility of the installer and
the organization he/she represents.
To Next Page
Loading...
Need help?
General
