Endress+Hauser SpectraSensors SS2100 Safety Manual

Maintenance and Service
Safety Manual 5
–5
6. Insert the new fuse into the screw cover and replace into the fuse
opening.
7. Use the screwdriver to turn the fuse cover clockwise until tight. Do
not overtighten.
8. Close enclosure door and apply power to the analyzer.
Repeat steps for each fuse to be replaced.
Figure 5–3 Unscrewing fuse cover
FUSE COVER
Figure 5–4 Replacing fuse
FUSE

Endress+Hauser SpectraSensors SS2100 Specifications

General

Brand	Endress+Hauser
Model	SpectraSensors SS2100
Category	Measuring Instruments
Language	English