Endress+Hauser SS2100i-2 - 1: Introduction; Manual Usage and Conventions; Analyzer Description and Operation; Safety Alerts and Labels

SS2100i-2 TDLAS Gas Analyzer Operating Instructions
Endress+Hauser 3
Table of Contents
1 About this document ............................ 4
1.1 Warnings .................................................................. 4
1.2 Symbols on the device............................................. 4
1.3 U.S. export compliance ........................................... 4
1.4 Standard documentation ........................................ 4
2 Introduction .......................................... 6
2.1 How to use this manual .......................................... 6
2.2 General warnings and cautions ............................. 6
2.3 Manufacturer address ............................................ 8
2.4 About the gas analyzers ......................................... 9
2.5 Getting familiar with the analyzer ...................... 12
3 Safety ................................................... 24
3.1 Potential risks affecting personnel ..................... 24
3.2 Explosion hazard ................................................... 24
4 Installation .......................................... 25
4.1 What should be included in the shipping box .... 25
4.2 Lifting/carrying the analyzer ............................... 25
4.3 Inspecting the analyzer ........................................ 25
4.4 Hardware and tools for installation .................... 26
4.5 Mounting the analyzer ......................................... 26
4.6 Protective chassis ground connections ............... 26
4.7 Opening the analyzer enclosure covers .............. 27
4.8 Cable installation .................................................. 27
4.9 Cable glands ........................................................... 27
4.10 Connecting the solenoid valves ........................... 28
4.11 Application of gland lubricant ............................. 31
4.12 Connecting the signals and alarms ..................... 32
4.13 Configuring the RS-232/RS-485 converter........ 34
4.14 Connecting electrical power to the analyzer ...... 34
4.15 Connecting the gas lines ...................................... 36
4.16 Changing the 4-20 mA current loop mode ........ 37
5 Specifications ...................................... 39
5.1 Exd accessory conditions of use .......................... 40
6 Maintenance and troubleshooting ... 42
6.1 Gas leaks ................................................................ 42
6.2 Excessive sampling gas temperatures and
pressures ................................................................ 42
6.3 Electrical noise ...................................................... 42
6.4 Contamination ...................................................... 42
6.5 Cleaning the mirrors ............................................. 43
6.6 Replacing the pressure sensor ............................. 47
6.7 Flame arrestor replacement and safety ............. 56
6.8 Peak tracking reset procedure ............................. 59
6.9 Instrument issues .................................................. 59
6.10 Service .................................................................... 61
6.11 Service repair order ............................................... 61
6.12 Packing, shipping, and storage ........................... 61
6.13 Storage ................................................................... 62
6.14 Disclaimers ............................................................ 62
6.15 Warranty ................................................................ 62
7 Analyzer parts .................................... 63
8 Wiring diagrams ................................. 72