Endress+Hauser SS2100i-2 - Analyzer Parts

SS2100i-2 TDLAS Gas Analyzer Operating Instructions
Endress+Hauser 63
7 Analyzer parts
This chapter provides lists and illustrations of all field replaceable parts used in the SS2100i-2 analyzer. Due to a
policy of continuous improvement, parts and part numbers may change without notice.
Not all parts listed are included on every analyzer. When ordering, please specify the system serial number (S/N) to
ensure that the correct parts are identified.
Figure Number
Reference Number
Material Number
Description
Fig 49
1
70156875
One Phase Filter Model FN2415
Fig 48
2
70157024
Power Supply, 100 to 240 VAC, 24 VDC / 1.3 A
Fig 49
3
70156988
Relay, With Socket, C1D2, 6 A, DC12V, SPDT
Fig 49
4
70156896
Thermostat, Manual Reset, 2455RM
Fig 49
5
70156904
Assembly, Power Supply, Traco
Fig 48
6
70162329
Assembly, PCB, Daughter, H2S, ARM9
Fig 49
7
70162331
Assembly, PCB, 4 to 20 mA, Dual Adjustable, Low Noise
Fig 48
8
70156894
Temperature Controller, Watlow, EZ-ZONE RM
Fig 48
9
70156877
Relay, 861 Solid State with Internal Heat Sink
Fig 50
10
70162330
Assembly, Analog Input Board
Fig 48
11
70162332
PCB, Assembly Temperature Control Hytek, 28 meter
Electronics panel assembly parts
Fig 48. Electronics panel assembly parts