Operating Instructions SS2100i-2 TDLAS Gas Analyzer
8 Endress+Hauser
2.2.4 Special safety symbols used on the equipment
Special safety symbols and labeling are used on the equipment to alert the user to potential hazards and important
information associated with the analyzer. Every symbol and label has significant meaning that should be heeded.
ENERGIZED FUSE WARNING — Do not remove or replace fuse when energized.
INVISIBLE LASER RADIATION — Avoid exposure to beam. Class 3b Radiation Product. Refer
servicing to the manufacturer or qualified personnel.
DO NOT REMOVE — Removal of the seal and/or disassembly of pieces traversed by label voids
the warranty.
CLASS 1 LASER PRODUCT — Invisible laser radiation when open. Avoid direct exposure to the
beam.
CLASS 3B LASER PRODUCT — Invisible laser radiation. Avoid direct exposure to beam. Class 3b
laser product.
CLASS 3B LASER WARNING — Class 3B invisible laser radiation when open. Avoid direct
exposure to the beam.
2.3 Manufacturer address
Endress+Hauser
11027 Arrow Route
Rancho Cucamonga, CA 91730
United States
www.endress.com
To Next Page
Loading...
