Page 24
Hold Screen - Permanent, Timed, and Temporary Holds (continued)
Once you choose the TIMED hold, you can change the date and
time until it will be effective, by pressing the MENU/SELECT button.
The date and/or time will be respectively underlined and you will be
able to change them by using the SCROLL buttons. As in the case of
the Permanent Hold, you can change the HEAT and/or COOL
temperatures by pressing the MENU / SELECT key and then the
SCROLL buttons to increase or decrease the temperatures.
You can also change the SETPOINT name from HOLD to another
one, by pressing again the MENU/SELECT key and then scrolling
though the different SETPOINT names. The Heat and Cool
temperatures will change accordingly. (Only the HOLD SETPOINT
allows the temperatures to be independently set).
Press SAVE CHANGES to accept the new settings and initiate the
Hold.
To cancel the Hold, return to the HOLD screen and press CANCEL
HOLD. The type of hold will show: NONE underlined.
To Next Page
Loading...
