Check Channel Time When Auto Channel is Enabled, you can specify the period of device will scan the wireless
signals around your area.
WDS AP / WDS Bridge mode:
Wireless Distribution System (WDS)
Using a WDS to connect Access Points wirelessly extends a wired
infrastructure to locations where cabling is not possible or inefficient
to implement.
Note: Compatibility between different brands and models of Access
Points is not guaranteed. It is recommended that a WDS network be
created using the same Access Point models for maximum
compatibility.
Also, all Access Points in the WDS network need to use the same
Channel and Security settings.
To create a WDS network, please enter the MAC addresses of the Access
Points that you want included in the WDS. There can be a maximum of
four access points.
To Next Page
Loading...
