Connectivity
1-4 Introduction
Connectivity
TheSecureStackA2switchconnectstoEthernetnetworksorworkstationsviathefixed
frontpanelMT‐RJandRJ45portsandthetwoSFPuplinkportsthatsupportoptional
Mini‐GBICs.
Atthetimeofthisprinting,theMini‐GBICsthatareavailablefromEnterasysand
supportedbythe
A2switcharedescribedinTable1‐1.TheseMini‐GBICsmeetorexceed
theIEEE802.3z‐1998standard.
Table 1-1 Description of Mini-GBICs
Mini-GBIC Specification
MGBIC-LC01 Provides one 1000BASE-SX compliant LC fiber-optic multimode port and a
standard LC connector. For optical and operating range specifications, refer to
“MGBIC-LC01/MGBIC-MT01 Specifications (1000BASE-SX)” on page A-4.
MGBIC-LC03 Provides one 1000BASE-SX Long Haul LC fiber-optic multimode port with a
standard LC duplex connector. For optical and operating range specifications,
refer to “MGBIC-LC03 Specifications (1000BASE-SX)” on page A-4.
MGBIC-LC09 Provides one 1000BASE-LX compliant LC fiber-optic single-mode port with a
standard LC connector. For optical and operating range specifications, refer to
“MGBIC-LC09 Specifications (1000BASE-LX)” on page A-5.
MGBIC-MT01 Provides one 1000BASE-SX compliant LC fiber-optic multimode port with a
standard MT-RJ connector. For optical and operating range specifications, refer
to “MGBIC-LC01/MGBIC-MT01 Specifications (1000BASE-SX)” on page A-4.
MGBIC-08 Provides one 1000BASE-ELX compliant LC fiber-optic single-mode port with a
standard LC connector. For optical and operating range specifications, refer to
“MGBIC-08 Specifications (1000BASE-ELX)” on page A-6.
MGBIC-02 Provides one RJ45 copper connection that is compliant with the 1000BASE-T
standard RJ45 connector. For operating range specifications, refer to
“MGBIC-02 Specifications (1000BASE-T)” on page A-6.
To Next Page
Loading...
Need help?
General