Enterasys SecureStack A2 A2H254-16 - Connecting to a Modem

Connecting to Console Port for Local Management
3-22 Hardware Installation
Whentheseparametersareset,theStartupscreenwilldisplay.Iftheswitchesareina
stackedconfiguration,proceedto
“ConnectingtotheNetwork”onpage3‐23.
Figure 3-14 Connecting to a Modem
1 DB9 female cable connector 5 Local modem
2 Serial interface cable 6 Remote modem
3 DB9 male Console port 7 PC with VT emulation application
4 DB25 male connector
ÂÃ Á À ÄÅÆ
Console