2
IP2288EN
EN
Contents
Subject Page
1. General safety precautions 3
General safety precautions for the user 4
2. Declaration of incorporation of partly completed machinery 5
2.1 Machinery Directive 5
3. Technical specifications 6
4. Standard installation 7
5. Dimensions 8
6. Main components 8
7. Installation 9
7.1 Preliminary checks 9
7.2 Base plate position 9
7.3 Gearmotor installation 10
7.4 Rack installation
11
7.5 Operation with virtual encoder 12
7.6 Installation of optional accessories 12
7.6.1
Magnetic limit switches
12
7.6.2
Battery kit
12
7.6.3
Remote release handle
12
8. Electrical connections 13
9. LCU48 card 14
10. Using of the menus 15
10.1 Switching the display on and off 15
10.2 Navigation keys 15
10.3 Menu map 16
11. Product start-up 18
11.1 WZ configuration wizard menu 18
12. Commands 20
12.1
SOFA1-SOFA2 or GOPAVRS self-controlled safety edge
21
13.
Outputs and accessories
21
14.
Jumper setting
22
15.
Adjustments
23
15.1
Main menu
23
15.2
Second level menu - AT (Automatic Configurations)
24
15.3
Second level menu - BC (Basic Configurations)
25
15.3.1
Additional BC level parameters that can be configured (available with AT → AA enabled)
26
15.4
Second level menu - BA (Basic Adjustment)
27
15.4.1
Additional BA level parameters that can be configured (available with AT → AA enabled)
28
15.5
Second level menu - RO (Radio Operations)
30
15.5.1
Additional RO level parameters that can be configured (available with AT → AA enabled)
31
15.6
Second level menu - SF (Special Functions)
32
15.6.1
Additional SF level parameters that can be configured (available with AT → AA enabled)
33
15.7
Second level menu - CC (Cycle Counter)
34
15.7.1
Additional CC level parameters that can be configured (available with AT → AA enabled)
35
15.8
Second level menu - EM (Energy Management)
35
15.8.1
Additional EM level parameters that can be configured (available with AT → AA enabled)
36
15.9
Second level menu - AP (Advanced Parameters)
36
15.9.1
Additional AP level parameters that can be configured (available with AT → AA enabled)
38
16.
Signals visualised on the display
40
16.1
Display of automation status
40
16.2
Display of safety devices and commands
42
16.3
Display of alarms and faults
43
17.
Troubleshooting
46
To Next Page
Loading...
Need help?
General