30
IP2288EN
EN
15.5 Second level menu - RO (Radio Operations)
Display Description
SR - Remote control storage
You can directly access the Remote control storage menu even with the display turned
off, but only with the Display visualisation mode option set to 00 or 03:
- for transmitting a remote control not present in the memory;
- for transmitting an unstored channel of a remote control already present in the memo-
ry.
→ →→
→
→
→
...x2, x3...
WARNING: if the display shows flashing, the remote control may already be
stored.
TX - Visualisation of counter showing remote controls stored
→→ → 16 radiocomandi [esempio]
MU - Indication of maximum number of remote controls that can
be stored in the integrated memory
You can store a maximum of 100 or 200 remote control codes.
→→
→
2” 2”
oppure
20 - 200 remote controls that can be stored
10 - 100 remote controls that can be stored
Selections
available
WARNING: selecting → (200 remote controls), the configurations and
saved with the → command will be lost. This also applies for the last configura-
tion reloaded with . In addition, new configurations cannot be saved on and .
RO - Radio operations
16 remote controls (example)
or
To Next Page
Loading...