4 Installing the software
4. Select all the components required for installation, and then click Next. See
Components on
Security World Software installation media (Windows and Unix)
on page 77 for more about the
component bundles and the additional software supplied on your installation media.
The selected components are installed in the default directory. The installer creates links to the
following nShield Cryptographic Service Provider (CSP) setup wizards under Start > All
Programs > nCipher:
l nCipher CSP install wizard, which sets up CSPs for 32-bit applications
l nCipher 64bit CSP install wizard, which sets up CSPs for 64-bit applications
5. The installer advises you that the SNMP agent does not run by default. Click Next to continue.
6. The installer advises you if you have an existing PKCS#11 installation. Click Next to continue.
7. The Security Assurance Mechanism (SAM) for the PKCS#11 library is selected by default. Select
No if you want to disable the SAM. Click Next to continue. See the User Guide for more about
the SAM and the available configuration options.
8. Click Finish to complete the installation.
9. Update your system environment PATH by inserting the sub-path %NFAST_HOME%\bin.
Page 25
nShield® Connect - Installation Guide
To Next Page