A.2.2 Uninstalling on AIX
A.2.2 Uninstalling on AIX
To uninstall the Security World Software from AIX:
1. Log in as a user with root privileges.
2. To remove drivers, install fragments, and scripts and to stop services, run the command:
/opt/nfast/sbin/install -u
3. Start the software management tool by running the command:
smit install_remove
4. For SOFTWARE name, select List to list all available file sets, and then select all those prefixed
with ncipher.
5. Press Enter to confirm the selected file sets for uninstallation.
The Remove Installed Software panel is displayed.
6. Ensure that the PREVIEW Only option is set to No (or the removal operation does not occur),
and press Enter.
7. When prompted to confirm that you are sure about the removal, press Enter again to start the
uninstall process.
8. If you are not planning to re-install the product, delete the configuration file /etc/nfast.conf if it
exists.
Do not delete the configuration file if you are planning to re-install the product.
If required, you can safely remove the module after shutting down all connected hardware.
nShield® Connect - Installation Guide
Page 74
To Next Page
Loading...