Appendix A Uninstalling existing software
A.2 Uninstalling Unix software
A.2.1 Uninstalling on Solaris
To uninstall the Security World Software from Solaris:
1. Assume the nFast Administrator privileges or root privileges by running the command:
$su -
2. Type your password, then press Enter.
3. To remove drivers, install fragments, and scripts and to stop services, run the command:
/opt/nfast/sbin/install -u
4. Remove the software package by running the command:
/usr/sbin/pkgrm
The command displays the list of components that were installed.
5. Select all the nShield packages (prefixed with the letters NC), then press Enter.
6. Follow the onscreen instructions, confirming the uninstallation of packages as prompted.
7. If you are not planning to re-install the product, delete the configuration file /etc/nfast.conf if it
exists.
Do not delete the configuration file if you are planning to re-install the product.
If required, you can safely remove the module after shutting down all connected hardware.
Page 73
nShield® Connect - Installation Guide
To Next Page