Entrust nShield Connect v12.50.4 - Hsm; Security World Mgmt

8 Top-level menu
8.2 HSM
HSM menu Submenus
2-1 HSM information
2-1-1 Display details
2-1-2 Display secure RTC
2-1-3 Speed test
2-1-4 Display statistics
2-2 HSM reset
2-3 HSM feature enable
2-3-1 Read FEM from card
2-3-2 Read from a file
2-3-3 View current state
2-3-4 Write state to file
2-4 Set HSM mode
2-4-1 Operational
2-4-2 Initialization
8.3 Security World mgmt
Security World mgmt menu Submenus
3-1 Display World info
3-2 Module initialization
3-2-1 New Security World
3-2-2 Load Security World
3-2-3 Erase Security World
3-3 RFS operations
3-3-1 Update World files
3-3-2 Remove RFS lock
3-4 Admin operations
3-4-1 Replace ACS
3-4-2 Recover keys
3-4-3 Recover PIN
3-4-4 Set secure RTC
3-5 Cardset operations
3-5-1 Create OCS
3-5-2 List cardsets
3-6 Card operations
3-6-1 Card details
3-6-2 Check PIN
3-6-3 Change PIN
3-6-4 Erase card
3-7 Keys
3-7-1 List keys
3-7-2 Verify key ACLs
Page 38
nShield® Connect - Installation Guide