4 Installing the software
3. Start the software management tool by running the command:
smit install_latest
4. Select List to display the input device or directory for the software, and select the location that
contains the installation image.
5. For SOFTWARE to install, select List, and then select all required file sets See
Components on
Security World Software installation media (Windows and Unix)
on page 77 for more about the
component bundles and the additional software supplied on your installation media.
6. Press Enter to confirm the file set selection.
When additional installation options are displayed, leave the default settings enabled. Press
Enter to confirm these settings, and then press Enter again to begin the installation.
7. After software installation is complete, run the install script with the following command:
/opt/nfast/sbin/install
8. Add /opt/nfast/bin to your PATH system variable:
l If you use the Bourne shell, add these lines to your system or personal profile:
PATH=/opt/nfast/bin:$PATH
export PATH
l If you use the C shell, add this line to your system or personal profile:
setenv PATH /opt/nfast/bin:$PATH
4.3.3 Installing on HP-UX
To install the Security World Software for HP-UX:
1. Log in as a user with root privileges.
2. Place the installation media in the optical disc drive, and mount the drive, using the -o cdcase
option.
Page 27
nShield® Connect - Installation Guide
To Next Page