B.5 Components required for particular functionality
B.5 Components required for particular functionality
Some functionality requires particular component bundles or individual components to be installed.
If you are planning to use Security World Software with an nShield Edge, ensure that the optional
Edge Monitor Controller feature is selected during installation.
Ensure that you have installed the Hardware Support (mandatory) and Core Tools (recommended)
bundles.
If you have CipherTools installation media, nCipher recommend that you install the CipherTools
Developer bundle.
If you have CodeSafe installation media, nCipher recommend that you install the CodeSafe Developer
bundle.
If you have CodeSafe installation media and you are developing in C:
l If your module has a part code of the form nC4
nn
2 or Bn1
nnn
, install the Prebuilt arm-gcc for
Codesafe/C component.
l If your module has a part code of the form nC4
nn
3, Bn2
nnn
, BN2
nnn(-E)
, or NH2
nnn
, install the
Prebuilt powerpc-gcc for Codesafe/C component.
In these part codes,
n
represents any integer.
If you have CipherTools installation media or CodeSafe installation media and you are developing in
Java, install the Java Developer and Java Support (including KeySafe) bundles; after installation,
ensure that you have added the .jar files to your CLASSPATH.
You must install the nfdrvk component if you are using a nCipher PCI card.
nShield® Connect - Installation Guide
Page 87
To Next Page