Entrust nShield Connect v12.50.4 - Model Numbers; Power and Safety Requirements; Additional Documentation; Terminology

1 Introduction
1.1.1 Model numbers
The table below shows the different versions of the module.
Model number Used for
NH2047 nShield Connect 6000
NH2040 nShield Connect 1500
NH2033 nShield Connect 500
NH2068 nShield Connect 6000+
NH2061 nShield Connect 1500+
NH2054 nShield Connect 500+
NH2075-B nShield Connect XC Base
NH2075-M nShield Connect XC Mid
NH2075-H nShield Connect XC High
NH2082 nShield Connect XC SCAP
1.1.2 Power and safety requirements
The module draws up to 220 watts:
l Voltage: 100 VAC -240 VAC
l Current: 2.0 A - 1.0 A
l Frequency: 50 Hz - 60 Hz.
The module PSUs are compatible with international mains voltage supplies.
1.2 Additional documentation
You can find additional documentation in the document directory of the installation media for your
product.
For information about enabling additional features (such as client licences), see the User Guide.
We strongly recommend that you read the release notes in the release directory of your installation
disc before you use the module. These notes contain the latest information about your product.
See the User Guide for a glossary of terms.
1.2.1 Terminology
The nShield Connect is referred to as the nShield Connect , the hardware security module , or the
HSM .
Page 10
nShield® Connect - Installation Guide